Activity in Technology and Support
Exclamation mark is not added to email subject
I have issue on incoming content filter. There are 3 condition will rule only if all condition match and the action will be adding ! in the subjectCondition 1 : Envelop Sender does not contain ###.###Condition 2 : Subject header does not contain ##Co...
Resolved! How can I pass another complete network over my network
I have a network that connects two buildings with switch A and switch B. These two switches are connected with a pair of trunks using 1G dishes. I have about 10 vlans configures in my environment and everything works fine for my equipment and network...
Factory Reset 9200L
I've gone through several discussions on this board of different folks trying to reinstall or repair a corrupted ios. I'm effectively in the same boat but can't seem to get passed my issue. I've tried loading in ROMMON but can't seem to get it there....
Resolved! Cloud Delivered FMC edit multiple interfaces
I am admin of a FTD cluster in a Cloud Delivered FMC, and we are In the process of a migration process. There is over 400 vlan interfaces. We need to be able to shut/no shut them on cue from the ISP etc during the process, and in worst case revert th...
Route redistribution
Hello, I am facing issues regarding connectivity as I am fairly new to BGP and route redistribution.In my topology there are 3 autonomous systems with eBGP running between them, each AS is running iBGP and a different IGP. I am trying to redistribute...
Cisco Catalyst Center - Enterprise Port cant ping Gateway and NTP
Hi Team, I have an issue. Our Customer ordered and catalyst Center. after we power on the UCS and do the initial config for the CIMC. we continue to install the Catalyst Center. but unfortunately when we try to config for the Interface Enterprise, un...
Clients can't get authenticated dot1x due to aaa cred fail C9800
Dear Cisco I found issue client can't authenticated dot1x with radius NPS Server and found error log Failure reason: aaa cred fail I using WLC Platform C9800 Virtual VM and C9800 WLC version 17.12.5
Resolved! Slot 0 is not capable
error on controller 9800 ver.(17.14.01.SPA.bin) when try to enable radio 24ghz. how i can enable radio?
Issues with Cisco 8851 + KEM – USB Disconnects on SIP Firmware 14-3-1
Hi,I am experiencing an issue with a Cisco 8851 phone running SIP firmware sip88xx.14-3-1-0201-246, with a Key Expansion Module (CP-8800-A-KEM) attached.The KEM keeps crashing – the USB connection is repeatedly being disconnected and reconnected. In ...
Question about conflict detection
Hi,I am hoping to get some guidance on conflict detection. We are running NSO 6.3.1.I have created one complex service that does builds the interface for customer services. It does a lot of work, it has a lengthy xml template and implements logic in ...
Resolved! ISE Messaging service
Hello everyone,We had a problem with our ISE that didn't respond to any RADIUS and TACACS requests. The TAC case was resolved by disabling the option "Use "ISE Messaging Service" for UDP Syslogs delivery to MnT".As this option is turned on by default...
ISE reimage using CISM
Hi All , We have SNS-3755-K9 in the production network.After installing it we have noticed that live logs of TACACS are not showing on the web portal. what is the best way to re-image the ISE ? As per Cisco TAC re-iamge should be done to fix the issu...
vWLC with Trunk port
Hi,I have a working vWLC with 5 APs and all of them are in one VLAN and SSID.Now I want to add another SSID and VLAN. I changed the switch ports that connect to APs from access to trunk with native VLAN that is previous access VLAN. I created another...
Resolved! how to register ASR9902 Smart license
We got pair of ASR9902 and wants to register Smart Software Licensing under our default account. I created a new token, but couldn't find the commands that cisco web provided as following from (system-admin) level. I already enabled smart flexible-c...
Boot loop to u-boot on a AIR-AP2802I-a-k9
Am trying to do a recovery from TFTP Server, the write of the image it´s succesful but the AP do no boot.Firmware: ap3g3-k9w8-tar.17_15_3_28.tarSteps:setenv ipaddr 192.168.1.100 setenv serverip 192.168.1.101 setenv loadaddr 0x81000000 setenv rcvr_ima...
